Banner
Are you here:Home >

Cold Shrink Coax Connector Sealing Kits

VL-KC
  • Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing
  • More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
  • Simultaneously expands and shrinks with work pieces without clearances, seals tight in harsh environment
  • Stably sealing the work pieces in windy environment
  • Well suited for cable less than 1KV
  • Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure.
  • Simple , safe installation, requires no tools or special training. No torches or heat work required.
  • Sealing class IP67
    • Detailed

    Cold Shrink Coax Connector Sealing Kits


     

    Description

     

    VOSLUN VL-KC series provide the correct Cold Shrink tube for the correct Cold Shrink tube and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.

     


    Application

     

    The main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing. Up until now, sealing tapes or Heat Shrink tubes were used.

     

     

     

    Technical Information

     

    The outer Cold Shrink tube is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube. The kits passed the .5 bares water pressure sealing test and met IEC 529 IP 67.

     

     

    Technical Data

     

    Properties

    Typical Data

    Test method

    HS

    49 A

    ASTM D 2240

    Tensile Strength

    11.8 MPa

    ASTM D 2671

    Elongation at break

    641%

    ASTM D 2671

    Tear Strength

    38.6 N/ mm

    ASTM D 624

    Dielectric Strength

    19.1 kV/mm

    IEC60243

    Dielectric Constants

    5

    90(in water) 7 days1940F5.6

     

     

    Dimensions

     

    3M Spec.

    Volsun Spec.

    Cables to Connect

    98-KC11

    VL-KC11

    ½” termination

    or ½” to ½” splice

    98-KC21

    VL-KC21

    ½” to 7/8” splice

    5/8” to 7/8” splice

    98-KC31

    VL-KC31

    ½” to 1 1/4” or 1 5/8” splice

    5/8” to 1 1/4” or 1 5/8” splice


    More>>ProductProduct

      More>>Contact Uscontact

      • Mobile/ Whats App: +86 17683906369
      • Office phone: +86-512-66386808
      • volsun@szvolsun.com
      • No.413, Mudong Road, Mudu Town,Wuzhong District, Suzhou 215101, China